Wireless plug with external output (Schuco)

Type: 5OUTPUT2202RO

JB-163N-PLUG is a bidirectional wireless component of JABLOTRON system. It can copy PG output when it is enrolled to JA-10xK control panel. Relay contact for power load switch up to 230 V AC / 24 V DC / max. 1 A is provided by the plug. The plug occupies one position in the system. The device should be installed by a trained technician with a valid certificate issued by an authorised distributor.

The control panel must contain the JA-11xR radio module.

Installation

1. Plug the product into a power outlet.
2. Connect the external output contact to the input of the controlled device.
3. A yellow LED indicates that the product is not assigned to the system.
4. Then follow the instructions below.

Figure 1: Description of the product
1 – UniSchuko plug; 2 – function button/LED indicator; 3 – Schuko socket; 4 – potential-free switched output cable;

Assignment to the system and settings

Depending on the type of control panel, use the recommended software or application, see the control panel manual.

Technical parameters

Power supply	110–230 V AC/50–60 Hz
Power consumption at 230 V AC (min/max)	0.4 W/1 W
Communication band	868.1 MHz, Jablotron protocol
Maximum radio-frequency power (ERP)	25 mW
Antenna	internal
Plug contact loadability – class protection II + FE:
– Maximum acceptable relay voltage	250 V AC
– Resistive load (cos φ = 1)	max. 16 A
– Induction, capacitive load (cos φ = 0.4)	max. 8 A
External output maximum loadability	230 V AC / 24 V DC / max. 1 A
Dimensions	70 x 70 x 77.6 mm
Weight	175 g
External output cable length	2 m
Operating temperature range	-10 °C to + 40 °C
Environment	Indoor general
Average operating humidity	75% RH, non-condensing
In compliance with	ETSI EN 300 220-1, 2, EN 50130-4, EN 55032, EN 62368-1, EN IEC 63000
Can be operated according to	ERC REC 70-03

	JABLOTRON a.s. hereby declares that the 5OUTPUT2202RO product is in a compliance with the relevant Union harmonisation legislation: Directives No.: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU if it is used as intended. The original of the conformity assessment can be found at www.jablotron.com – Section Downloads.
	Note: Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please return the product to the dealer or contact your local authority for further details of your nearest designated collection point.