Smart wireless plug (Schuko)

JB-161N-PLUG is a bidirectional wireless component of JABLOTRON system. It can copy PG output when it is enrolled to JA-10xK control panel. Galvanic separation of relay contact for power load switch up to 230 V/16 A (4000 W) is provided by the plug. The plug occupies one position in the system. The device should be installed by a trained technician with a valid certificate issued by an authorised distributor.

Installation

1. Plug the product into a power outlet.
2. A yellow LED indicates that the product is not assigned to the system.
3. Then follow the instructions below.

Figure 1: Description of the individual parts of the product.
1 – UniSchuko plug; 2 – functional button / LED indicator; 3 – Schuko socket;

Enrollment to the system and settings

Depending on the type of control panel, use the recommended software or application, see the control panel manual.

Technical specification

Power supply	110–230 V AC / 50–60 Hz
Power consumption at 230 V AC (min / max)	2 W / 6 W
Communication band	868.1 MHz, Jablotron protocol
Maximum radio-frequency power (ERP)	< 25 mW
Antenna	internal
Relay contact loadability – class protection II + FE:
Maximum acceptable relay voltage	230 V AC
Resistive load (cos φ = 1)	max. 16 A
Induction, capacitive load (cos φ = 0.4)	max. 8 A
Dimensions	70 x 70 x 77.6 mm
Weight	105 g
Operating temperature range	-10 °C to + 40 °C
Average operating humidity	75% RH, non-condensing
In compliance with	ETSI EN 300 220-1, -2, EN 50130-4, EN 55032, EN 62368-1, EN IEC 63000
Can be operated according to	ERC REC 70-03

	JABLOTRON a.s. hereby declares that the JB-161N-PLUG product is in a compliance with the relevant Union harmonisation legislation: Directives No.: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU if it is used as intended. The original of the conformity assessment can be found at www.jablotron.com – Section Downloads.
	Note: Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please return the product to the dealer or contact your local authority for further details of your nearest designated collection point.