Wireless combined PIR motion detector with photoverification camera

type: 5PIRCAM2202MQ

The product is a wireless component of JABLOTRON system. It serves for the detection of human movement in building interiors and visual alarm confirmation. The camera takes color photos with a resolution of up to 640 x 480 pixels. The camera is equipped with a visible flash. The detector is designed to be installed by a trained technician with a valid Jablotron certificate.

Installation

During the installation pay attention that there should be no obstacles in the detector’s view, such as:

• items that change temperature quickly (electric stove, gas appliances etc.)
• objects that move (e.g. waving curtains over the heating, robotic vacuum cleaner)
• no obstacles obstructing his view of the protected area
• moving pets

We do not recommend installing the detector:

• against windows or spotlights
• in places where air flows (ventilation, air conditioning, vents, leaky doors etc.)

Note: Installation in the corner of a room requires more attention during testing due to possible reflection of flash in the photographed scene (especially in the dark).

Installation procedure:

1. Open the detector cover by using the latch (6). Do not touch the PIR sensor inside (13) – it could be damaged.
2. Remove the locking screw (8). Release the PCB by pressing the latch (14).
3. The recommended installation height is 2.5 m above the floor.
4. Attach the rear housing part to the wall using screws (vertically, with the cover latch facing downwards).
5. Insert the PCB back into the rear housing part using the electronics latch (14) and screw the locking screw (8) back. Insert batteries to the battery holder (6).
6. Close the detector cover, snap into the cover latch and secure with the locking screw (5).

   

Figure 1: Description of external and internal parts of product
1 – camera flash; 2 – camera lens; 3 – LED indicator; 4 – PIR detector lens; 5 – locking screw; 6 – cover latch; 7 – battery holder; 8 – camera module locking screw; 9 – LED indicators; 10 – external tamper connector; 11 – serial number; 12 – tamper switch; 13 – PIR sensor; 14 – PCB latch;

Enrolment to the system and settings

Depending on the type of control panel, use the recommended software or application, see the control panel manual.

Technical specification

Power	2x lithium battery, type CR123A (3 V/1.5 Ah) Please note: Batteries are not included
Typical batteries lifetime	approx. 2 years (1 activation and 1 series of photos a day)
LowBatt voltage	≤2.6 V
Quiescent current consumption	90 µA
Maximum current consumption	700 mA
Communication	868,1 MHz, protocol JABLOTRON
Maximum radiofrequency power (ERP)	<25 mW
Recommended installation heigh	2,2–2.5 m
Communication range	approx. 300 m (open area)
PIR Detection angle/detection coverage:	90 °/12 m
Range of the flash	max. 3 meters
Resolution of the camera	LQ 320 x 240; HQ 640 x 480 pixels
Photo size LQ/HQ (typically)	5-20 kB/5-64 kB
Typical (LQ) photo transmission time to the control panel	up to 30 s (15 s)
Typical (HQ) photo transmission time to the control panel	up to 180 s (90 s)
Typical photo transfer time to the server	15 s/GPRS; 2 s/LAN
Dimensions	150 x 65 x 44 mm
Weight (without batteries)	130 g
Operational temperature range	-10 °C to +40 °C
Environment	indoor general
Average operational humidity	75% RH, non-condensation
Classification	Security grade 2/Environmental class II
(according to EN 50131-1)
Certification body	Trezor Test s.r.o. (no. 3025)
In compliance with	EN 50130-4, EN 50131-1, -2-2, -5-3, -6, EN 55032, ETSI EN 300 220-1, -2, EN IEC 62368-1, EN IEC 63000
Can be operated according to	ERC REC 70-03
Recommended screw	2 x ø 3,5 x 40 mm (countersunk head)

	JABLOTRON a.s. hereby declares that the 5PIRCAM2202MQ product is in a compliance with the relevant Union harmonisation legislation: Directives No.: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU, if it is used as intended. The original of the conformity assessment can be found at www.jablotron.com Section Downloads.
	Note: Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please return the product to the dealer or contact your local authority for further details of your nearest designated collection point.