Wireless combined motion and glass-break detector

Type: 5PIRGBS2306MB

The product is a wireless component of JABLOTRON system. It is used human movement detection in the interior of buildings and for detection of breakage of glass surfaces forming the building. It contains two independent detectors (it occupies 2 positions in the control panel). It uses a PIR detector to detect the movement of people and a GBS detector to detect the breakage of glass surfaces. The GBS alarm is evaluated based on changes in air pressure and the characteristic sounds of glass breaking. The detector is designed to be installed by a trained technician with a valid Jablotron certificate. The control panel must be equipped with a radio module to communicate the product with the system.

Installation

During the installation pay attention that there should be no obstacles in the detector’s view, such as:

• items that change temperature quickly (electric stove, gas appliances etc.)
• objects that move (e.g. waving curtains over the heating, robotic vacuum cleaner)
• no obstacles obstructing his view of the protected area
• moving pets

We do not recommend installing the detector:

• against windows or spotlights
• in places where air flows (ventilation, air conditioning, vents, leaky doors etc.)
• near air outlets, fans, or other sources of air pressure changes or intense sounds
• in a protected area where there are sources of vibration or shock

Installation procedure:

1. Open the cover of detector by using the latch (4). Do not touch the PIR sensor inside (10) – could be damaged.
2. Release the PCB located in the rear cover by pressing the latch (7) at the top of the cover.
3. Recommended installation heigh is 2.2–2.5 m above the floor level.
4. Screw the rear cover to the wall (vertically, cover latch down). For proper detection of the detector being torn off the surface, use the tear holes in the oval part of the rear cover to screw it in as well.
5. Insert the PCB back and lock with the latch (7). Insert batteries to the battery holder (9). Make sure the batteries are inserted with the correct polarity. Close the detector cover, snap into the cover latch (4) and lock with the locking screw.

Fig. 1: Description of the external and internal parts of product
1 – LED indicator; 2 – GB sensor; 3 – PIR lens; 4 – cover latch; 5 – hole for locking screw; 6 – LED diode; 7 – PCB latch; 8 – connector for GBS module; 9 – battery holder; 10 – PIR sensor; 11 – tamper; 12 – serial number;

Enrollment to the system and settings

Depending on the type of control panel, use the recommended software or application, see the control panel manual.

Technical specification

Power	2x alkaline battery type LR6 (AA) 1.5 V/2.45 Ah Please note: Batteries are not included.
Typical lifetime of batteries	approx. 2 years
Low battery voltage	<2.4 V
Quiescent current consumption	53 μA
Maximal current consumption	50 mA
Communication band	868.1 MHz, JABLOTRON protocol
Maximum radio-frequency power (ERP)	<25 mW
Recommended installation height	2.2–2.5 m
Detection angle / detection coverage (PIR)	110 °/12 m
Detection angle / detection coverage (GBS)	90 °/9 m
RF range	500 m (open area)
GBS detection type	acoustic
Dimensions	60 x 98 x 52 mm
Weight (w/o batteries)	91 g
Classification	security grade 2/Environmental class II (according to EN 50131-1)
Environment	indoor general
Operating temperature range	-10 °C to +40 °C
Average operating humidity	75% RH, non-condensing
Certification body	Trezor Test (no. 3025)
Complies with	EN IEC 63000, EN 50130-4, EN 55032, EN IEC 62368-1, ETSI EN 300 220-1, -2, EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-2-7-1, EN 50131-6
Can be operated according to	ERC/REC 70-03
Recommended screw	2 x ø 3.5 x 40 mm (countersunk head)

	JABLOTRON ALARMS a.s. hereby declares that the 5PIRGBS2306MB product is in a compliance with the relevant Union harmonisation legislation: Directives No.: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU, if it is used as intended. The original of the conformity assessment can be found at www.jablotron.com Section Downloads.
	Note: Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please return the product to the dealer or contact your local authority for further details of your nearest designated collection point.