JA-155M, JA-155M-BR, JA-155M-GR and JA-155M-AN


If you want to save to PDF, please select
‘Save as PDF’ when the print dialog opens.

Wireless mini magnetic detector

Type: 5MAG2306RF

switch to the manual for the JABLOTRON 100+ system

The product is a component of the JABLOTRON system. It is used to detect the opening of doors, windows, etc. The detector can have either a status or impulse response. The detector is designed to be installed by a trained technician with a valid Jablotron certificate.

Installation

  1. Open the detector cover by pressing the latch (3).
  2. Screw the housing part to the selected location on the door or window frame.
  3. Insert the battery into the battery holder (5).
  4. Replace the detector cover, snap into the cover latch (3) and secure with the supplied locking screw (2).
  5. Screw the permanent magnet (4) onto the moving part of the window or door.
   
Figure 1: Description of external and internal parts of the product
1 – LED indicator; 2 – locking screw; 3 – cover latch; 4 – permanent magnet; 5 – battery holder; 6 – tamper switch;

Enrollment to the system and settings

Depending on the type of control panel, use the recommended software or application, see the control panel manual.

Technical parameters

Power1 x lithium battery, type CR2032, 3 V/230 mAh
Please note: Battery not included
Typical battery lifetime1.5 years
Low battery voltage <2.6V
Quiescent current consumption16 µA
Maximum current consumption50 mA
Communication band868.1 MHz, JABLOTRON protocol
Maximum Radio Frequency Power (ERP)<25 mW
RF range300 m (open area)
Dimensions of detector28 x 58 x 17 mm
Dimensions of magnet28 x 17 x 17 mm
Weight of detector (without battery)13 g
Weight of magnet16 g
Classificationsecurity grade 2/environmental class II (according to EN 50131-1)
Environmentindoor general
Operating temperature range-10 °C to +40 °C
Average operating humidity75% RH, non-condensing
Certification bodyTrezor Test (no. 3025)
In compliance withEN IEC 63000, EN 50130-4, EN 55032, EN ETSI 300 220-1, -2, EN 50131-1, -2-6, -5-3, EN 62368-1
Can be operated according toERC/REC 70-03
Recommended screw2 x ø 3,5 x 40 mm (flat head)



JABLOTRON ALARMS a.s. hereby declares that the 5MAG2306RF product is in a compliance with the relevant Union harmonisation legislation: Directives No.: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU, if it is used as intended. The original of the conformity assessment can be found at www.jablotron.com Section Downloads.
Note: Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please return the product to the dealer or contact your local authority for further details of your nearest designated collection point.

JA-155MMRF55100
(04.09.2024)